Home
About Us
Products
Knowledge
Strength
Contact Us
FAQ
How to treat industrial wastewater produced by mineral processing reagents
The effect of mineral processing reagents on the pollution of the ecological environment is very complicated.There are direct harms and indirect harms.Next,let's take a look at how to deal with the industrial wastewater produced by the beneficiation reagent.
2022
11-18
What kind of beneficiation reagents need to be added in batches
The purpose of rational addition of beneficiation agents is to ensure greater efficiency of the agents in the slurry and maintain an appropriate concentration.Therefore,according to the characteristics of the ore,the nature of the agent and the process requirements,the site and method of dosing can be selected reasonably.In addition,there are some situations that need to be added in batches.
07-20
How to distinguish the quality of foaming agent?
Foaming agent is a type of surfactant that can reduce the surface tension of water to form foam,so that air bubbles in the aerated flotation slurry can be attached to the selectively floating mineral particles.Everything is good or bad.What aspects should be looked at to identify the quality of foaming agent?For specific methods,see what the beneficiation reagent manufacturer says:
07-12
Several types and properties of collectors
The collectors become hydrophobic on the surface of the minerals and make the floating mineral particles adhere to the bubbles.There are many types and properties of the flotation agent during use.The following briefly introduces several collectors and properties.
2021
11-03
Adsorption form of flotation reagent on mineral surface
Molecular adsorption,that is,the agent is adsorbed on the surface of minerals in the form of molecules.Such as the adsorption of neutral oil on the surface of non-polar minerals(graphite,molybdenite,etc.),the adsorption of double xanthate on the surface of sulfide minerals,and the adsorption of certain foaming agents(such as terpineol oil,fatty alcohol,etc.)on the gas-liquid Adsorption of the interface.
What should be paid attention to in the use and storage of xanthate
Xanthate is the most commonly used collector for flotation of sulfide minerals such as galena,yellow actinium,sphalerite,pyrite,natural gold,natural silver,mercury,and malachite.There are ethyl xanthate,pentyl xanthate and so on.Xanthates with 4 carbon atoms in the hydrocarbon group are collectively called low-grade xanthates,and xanthates with carbon atoms above 4 are collectively called high-grade xanthates.
2020
12-28
What are the collectors commonly used in beneficiation reagents
In nature,except for coal,graphite,sulfur,talc and molybdenite and other mineral particles that have hydrophobic surface and natural floatability,most minerals are hydrophilic,and so are gold minerals.Adding a chemical can change the hydrophilicity of mineral particles and produce hydrophobicity to make them floatable.This chemical is usually called a collector.Collectors are usually polar collectors and non-polar collectors.
09-10
Concentration ratio when using butyl xanthate
Butyl xanthate is generally used as a collector in concentrators,and its dosage is determined by the beneficiation test.The data provided is generally how many grams/ton,that is,how many grams per ton of raw ore.
Development and Application of Molybdenum Flotation Reagent HB-M5
Molybdenum is a metal element that is rarely distributed in nature.There are about 30 molybdenum-containing minerals discovered today.The top three minerals are sulfide minerals,oxide minerals,and molybdate minerals.Among them,sulfide minerals are the representative.Molybdenite is the most widely distributed.At present,the metal molybdenum obtained from molybdenite accounts for more than 98%of the world's total molybdenum output.
Foaming agent is a type of surfactant that can reduce the surface tension of water to form foam,so that air bubbles in the aerated flotation slurry can be attached to the selectively floating mineral particles.Everything is good or bad.What aspects should be looked at to identify the quality of foaming agent?For specific methods,
2017
11-04
